memoasebo.blogg.se -

CP210X USB TO UART BRIDGE INSTALL
CP210X USB TO UART BRIDGE DRIVER
CP210X USB TO UART BRIDGE MANUAL
CP210X USB TO UART BRIDGE SOFTWARE

If you agree with the details listed above, click one of the following links corresponding to each OS to download the virtual COM port driver installation program.

CP210X USB TO UART BRIDGE MANUAL

Please also refer to the TS-890S Instruction manual for details. In the display example above, the virtual "Enhanced" COM port is assigned to COM4. The port displayed with the number (2) is the virtual COM (Enhanced) port of the transceiver. In the display example above, the virtual "Standard" COM port is assigned to COM3. The port displayed with the number (1) is the virtual COM (Standard) port of the transceiver.

Move the mouse cursor to the line displayed in the "Value" column (the top line if multiple lines are displayed) and check the number in the parenthesis on the right end of the character string.

Select the "Details" tab and then select "Location Paths" (or "Rutas de acceso de ubicación":Español, "Chemins d'accès des emplacements":Français, "Speicherortpfade":Deutsch, "Percorsi":Italiano, "Locatiepaden":Nederlands) from the Property drop-down menu.

Double-click on these in the Device Manager to display the respective Properties windows.

These "Standard" and "Enhanced" virtual COM ports are distinguished as follows. In the TS-890S Menu settings, these 2 virtual COM ports are defined as and. When connecting a TS-890S transceiver to the PC, 2 virtual COM ports are assigned as follows.

CP210X USB TO UART BRIDGE SOFTWARE

Select this port number in the configurations for communication in the software you are using. This means that COM3 is assigned for the connection with the transceiver.

In the above example, “Silicon Labs CP210x USB to UART Bridge (COM3)” is listed. Click in the displayed window.Ĭlick “Ports (COM & LPT)” to extend it, then you can find “Silicon Labs CP210x USB to UART Bridge (COMxx)”.The “COMxx” number is different depending on your PC. (Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable, or after connecting the KPG-22U/46U/186U to the PC.)ġ.

Open the "Device Manager" to confirm which COM port number is assigned for connection with the device. If a reboot request appears, please reboot the PC. The installation of the device driver software will start automatically. Turn the transceiver power ON, then connect it to a PC via a connection cable for the transceiver.

CP210X USB TO UART BRIDGE INSTALL

In the created folder, double click the "Cp210xVCPInstaller_x86.exe" with 32-bit OS, or the "Cp210xVCPInstaller_圆4.exe" with 64-bit OS, and follow the instructions that appear on the display to install the virtual COM port driver. This virtual COM port driver installation program is provided by Silicon Laboratories Inc.Īfter reading through the following explanations, feel free to download and install the software.ĪTTENTION: Do not connect the device to a PC before installing the virtual COM port driver.Įxtract the downloaded file ("CP210x_Windows_Drivers.zip" for Windows ® 8.1, or "CP210x_Universal_Windows_Driver.zip" for Windows ® 10) into a designated folder.In the designated folder, a folder labeled "CP210x_Windows_Drivers" or "CP210x_Universal_Windows_Driver" will be created. You can connect your TS-990S, TS-890S, TS-590SG, TS-590S, or TH-D72A/E to a PC via a USB cable, or you can connect your TH-K20A/E, TH-K40A/E, TM-281A/E, TM-481A, or other transceivers to a PC via the KPG-22U/46U/186U programming cables by installing the virtual COM port driver in the PC, and then utilize the Radio Control Program, Memory Control Program, or other software we have provided. Thank you for choosing the KENWOOD transceivers.